MCVC – MIDI to CV converter (DIY)

181.81 incl. VAT ex Shipping

10 in stock

Connect and control your Eurorack Synthesizer with your MIDI gear, build the Majella 4-voice expandable MIDI to CV converter!

The MCVC DIY KIT is a straightforward build and creates an interface between your Eurorack synthesizer system and devices that communicate using the MIDI -protocol. The MIDI CV Converter bridges the gap between MIDI and Eurorack systems, it converts MIDI messages to control voltages, which correspond to Eurorack synthesizer signal standards.

You can expand the Majella MCVC with four voices using the MCVC-exp and you can expand up to 20 voices!

10 in stock

SKU: M-MCVC-DIYKIT Category: Tags: , ,

Description

This is a do it yourself (DIY) full kit! You can buy an assembled module here

This is a DIY kit which requires soldering and basic (Voltmeter, at least 3 decimals) measurements.

The Majella MCVC is a four-channel, expandable MIDI to Control Voltage (CV) converter.

The MCVC is a straightforward interface between the Eurorack synthesizer system and devices that communicate using the MIDI -protocol. The MIDI CV Converter bridges the gap between MIDI and Eurorack systems, because it converts MIDI messages to control voltages, which correspond to Eurorack synthesizer signal standards.

You can use the MCVC to output 4 mono channels (MIDI channel 1-4). In “mono” mode the MCVC uses “latest note priority”. You can also use the MCVC poly mode to play 4 voice polyphonic (MIDI channel 1).

You can expand the Majella MCVC with four voices at a time and expand up to 20 voices using the Majella MCVC Expansion module!

When you buy this module please note it uses the 5V rail (16 pin eurorack connector).

Make sure to add this module to your ModularGrid!

Included items are:

  • Complete DIY kit (SMD parts are pre-soldered)
  • Montage screws M3 (4x)
  • 16 pin power cable.

Check out the full DIY build video here:

 

Short video Test showing the accuracy of the module (using a Doepfer analog VCO):

Specifications

  • dimensions: 128.5 x 70.8 x 2 mm (14HP)

  • power supply usage: +12V (39mA), -12V (25mA), 5V (30mA)

  • This module uses the 5V rail!

Manual

Manual

Download the User Manual below:

USER MANUAL

Download the DIY Manual below:

DIY MANUAL

Where to buy?

Majella Audio (NL) is the only seller at this moment.

Reviews

There are no reviews yet.

Be the first to review “MCVC – MIDI to CV converter (DIY)”

Your email address will not be published. Required fields are marked *

You may also like…